|
|
|
Pumps (Model-AG- Pmp/955-i1008)
|
|
|
|
Features
|
|
This pump is a centralized delay pump with an electric motor and a pull-out magnetic drive. It is designed for easy handling of toxic, gaseous, or valuable liquids in obvious industrial applications. It operates without mechanical seals (seal-less), preventing bulk leakage.
|
|
Key Specifications and Features:
|
|
‒
|
Improved efficiency and increased net positive pressure required (NPSHreq) thanks to the experimentally proven hydraulic design of the impellers (blades).
|
|
‒
|
Reduced operating costs by minimizing the nominal impeller diameter to suit the specific operating point.
|
|
‒
|
Low wear, reduced vibration levels, and excellent smooth operation characteristics thanks to good suction performance and virtually cavitation-free operation across a wide operating range.
|
|
‒
|
A wide variety of standard materials to perfectly match the pump to the fluid being treated.
|
|
‒
|
PumpDrive motor is perfectly matched to the pump and motor with factory default settings.
|
|
‒
|
A space-saving variable speed control system mounted on the motor up to 45 kW.
|
|
‒
|
Completely transparent pump operation thanks to the PumpMeter.
|
|
‒
|
Motor efficiency exceeds 95% of nominal efficiency when operating at 25% of its nominal power on the torque-speed quadratic curve.
|
|
‒
|
Sustainable and environmentally friendly because no magnets based on "rare earth elements" such as NdFeB are used.
|
|
‒
|
Main Applications
|
|
|
•
|
Handling clean or aggressive liquids that are non-chemical and mechanically aggressive to pump materials. Water Supply Systems
|
|
•
|
Cooling Circuits
|
|
•
|
Swimming Pools
|
|
•
|
Firefighting Systems
|
|
•
|
General Irrigation Systems
|
|
•
|
Pump Drainage Systems
|
|
•
|
Heating Systems
|
|
•
|
Air Conditioning Systems
|
|
•
|
Sprinkler Irrigation Systems
|
|
Specification
|
|
Max. head
|
236 m
|
|
Max. allowed working pressure
|
40 bar
|
|
Maximum allowable fluid temperature
|
-20- +200°C
|
|
Motor Rating
|
Maximum drive rating up to 220kw
|
|
Capacity
|
0.5-400m³/h
|
|
Lifting height:
|
Up to 90m
|
|
Pump Type
|
Horizontal, End-Suction, Single-Stage
|
|
Flow Rate
|
Up to 1,200 m³/h (depending on size)
|
|
Head Range
|
Up to 160 meters
|
|
Power Range
|
1 HP – 250 HP
|
|
Speed
|
1450 / 2900 RPM
|
|
Voltage
|
220V / 380V / 415V / 440V (3-Phase)
|
|
Frequency
|
50 Hz / 60 Hz
|
|
Connection type:
|
Flange
|
|
Drive concept:
|
With electric actuator,Combustion engine
|
|
Pump Max. flow rate
|
1368 m³/h
|
|
Min. flow rate
|
1.5 m³/h
|
|
Max. head:
|
160 m
|
|
Pump Min. head:
|
2 m
|
| |
|
|
|
|
|